-
Starfire SF-2100C
- File
.nc- Torch on / off
M07 / M08- Kerf
G41 / G42
Portable and light gantry tables. Kerf set on the controller.
-
Starfire SF-2300S
- File
.nc- Torch on / off
M07 / M08- Kerf
G41 / G42
Gantry tables with THC. Same dialect as SF-2100C.
-
Fangling F2100B
- File
.txt- Torch on / off
M07 / M08- Kerf
G41 / G42
Entry Fangling controller; keep file names short.
-
Fangling F2300A
- File
.txt- Torch on / off
M07 / M08- Kerf
G41 / G42
Our default post. The most common controller on Chinese tables.
-
Fangling F2500B
- File
.txt- Torch on / off
M07 / M08- Kerf
G41 / G42
Larger screen variant; identical G-code.
-
Fangling F2600A
- File
.txt- Torch on / off
M07 / M08- Kerf
G41 / G42
Flagship Fangling with bevel options.
-
Beijing START
- File
.cnc- Torch on / off
M07 / M08- Kerf
G41 / G42
EIA-style with controller-side kerf.
-
JiaQiang
- File
.cnc- Torch on / off
M07 / M08- Kerf
G41 / G42
EIA-style; similar to START.
-
HYD Hongyuda
- File
.cnc- Torch on / off
M07 / M08- Kerf
G41 / G42
Fitted to many budget gantries.
-
Adtech
- File
.nc- Torch on / off
M07 / M08- Kerf
G41 / G42
Adtech plasma controllers.
-
Weihong NcStudio
- File
.nc- Torch on / off
M03 / M05- Kerf
G41 / G42
PC-based; check your torch output mapping.
-
Shanghai Huayuan
- File
.cnc- Torch on / off
M07 / M08- Kerf
G41 / G42
Huayuan controllers on oxy-fuel and plasma tables.
-
Mach3
- File
.tap- Torch on / off
M03 / M05- Kerf
Pre-compensated path
Hobby and production tables with THC plugins.
-
LinuxCNC
- File
.ngc- Torch on / off
M03 / M05- Kerf
Pre-compensated path
Works with QtPlasmaC.
-
ESSI
- File
.esi- Torch on / off
7 / 8- Kerf
Kerf codes 29 / 30
Numeric word format used on older industrial machines.
-
Generic EIA
- File
.nc- Torch on / off
M07 / M08- Kerf
G41 / G42
A safe plain G-code baseline.
-
Custom post
- File
Your choice- Torch on / off
Your codes- Kerf
Your choice
Define header, torch codes and arc format to match any machine.
How to load your file
- Copy to a USB stick
Use a FAT32 stick and keep the file in the root folder. Many Chinese controllers only read 8-character names.
- Check the extension
Fangling expects .txt, Starfire .nc, START .cnc. Rename if your controller does not list the file.
- Set the origin
Jog the torch to the bottom-left corner of the sheet and zero X and Y. Our programs start from that corner.
- Enter the kerf
For G41/G42 posts, type the kerf width in the controller (about 1.5 mm at 45 A). Pre-compensated posts need nothing.