43ready-made designs to size
50 mmthickest mild steel
48 hfree quotation
£15.80minimum order, ex VAT
About these parts
Angle brackets, shelf brackets, L and T plates, joist hangers and mounting brackets, cut flat for bending or welding.
Who orders them: Builders, joiners, fabricators and installers who need a run of identical brackets.
Open any design below in the Nesting Studio, type in your sizes, holes and quantity, and the price updates as you go. Identical parts share one part mark and are nested together on the sheet.
Designs in the shape library
- Angle bracket blank (folded)Flat blank for a press-brake folded angle bracket: two legs with your hole counts, fold line etched at the leg length.
- Z bracket blank (folded)Flat blank for a Z (offset) bracket: three zones with fold lines etched and holes in both flanges.
- U / channel bracket blankFlat blank for a U (channel) bracket around a post or joist: base with fixing holes, two side legs with through-bolt holes, fold lines etched.
- Pipe clamp half (saddle)Flat two-bolt pipe clamp half: plate with a semicircular cut for the pipe OD and bolt holes either side (pair two for a full clamp).
- Pipe hanger strapFlat strap that rolls round a pipe for a hanger: length from the pipe OD, drop-rod holes in both ears.
- Channel strut bracketFlat plate fitting for 41 mm channel strut systems: hole pattern of 13.5 / 14 mm holes on 47.6 mm (1 7/8") pitch common to strut fittings.
- Cable tray wall bracketCantilever arm for cable tray: L-shaped plate with tray slot holes along the arm and wall fixing slots in the upright.
- Hanging sign bracketProjecting sign bracket: wall plate, top bar with chain holes and a decorative scroll brace, cut as one piece.
- Floating shelf bracketConcealed floating-shelf back plate with countersink-size wall holes and an etched row where the support pins are welded.
- Wall mount back plateRectangular wall mounting plate with a 4- or 6-hole wall fixing pattern, a central slot for cables and keyhole hangers for one-person fitting.
- Heavy gusseted bracket setGusseted cantilever bracket profile (back, top and diagonal gusset in one plate) with a lightening cut-out and fixing holes.
- Tee bracket (corner brace)Flat T-shaped mending plate for timber or steel joints with a staggered screw pattern.
- Mending / nail plateFlat jointing plate with a dense staggered screw or nail hole field for timber repairs.
- Timber post anchor / shoeFlat cross-shaped blank for a U-shaped post shoe: square base with anchor holes, two side flaps with bolt holes, fold lines etched.
- Restraint strap (lateral)Flat lateral restraint strap: long strip with screw holes along its length and an etched bend line for the turn-down end.
- Gallows bracketTriangular gallows bracket cut as a frame: wall leg, shelf leg and diagonal brace with a triangular window.
- Shelf bracket with lightening holesSolid triangular shelf bracket with a curved hypotenuse and a row of graded lightening holes.
- Scaffold-board shelf bracketFlat bracket with an open U to drop a 225 × 38 mm scaffold board into, and wall holes.
- Fascia gutter bracketFlat fascia bracket for half-round gutter: curved cradle with a lip and two fascia screw holes.
- Downpipe clip plateFlat half-collar clip for a round downpipe with a projecting stand-off and wall hole.
- Pipe saddle with earsFlat pipe saddle: half-ring that goes over the pipe and two ears with screw holes.
- Cable cleat plateTwo-piece cable cleat half: plate with a round cut for the cable and two clamp bolt holes.
- Cantilever support armTapered cantilever arm with a bolted wall plate end and a row of holes along the top for services.
- Flat corner braceFlat L-shaped corner brace with countersink-size screw holes on both legs.
- Flat T plateFlat T-shaped jointing plate with screw holes on all three arms.
- Solar panel L-foot (flat)Flat blank for a solar-rail L-foot: roof leg with two screw slots, rail leg with a slotted bolt hole, fold line etched.
- Solar roof hook blankFlat blank for a tiled-roof solar hook: rafter plate with screw slots and a cranked arm that passes under the tile.
- Strut flat splice plate, 4-holeFour-hole flat splice plate for 41 mm channel strut, holes at 47.6 mm pitch.
- Strut flat tee plateFlat tee fitting for joining three strut runs, holes on 47.6 mm pitch.
- Strut flat cross plateFlat cross fitting for four strut runs meeting at one point.
- Strut flat L plateFlat L fitting for a strut corner, three holes per leg position.
- Strut 45° angle plateFlat fitting that joins a strut run to a brace at 45°.
- Strut square slotted washerSquare washer plate with a slotted hole for 41 mm channel strut.
- Beam clamp plateClamp plate that grips a beam flange without drilling: stepped toe that bears on the flange and a bolt hole behind.
- Pipe roller bracketSide plate for a pipe roller support with the roller axle hole and two base fixing holes.
- Radiator wall bracketFlat radiator wall bracket with a hook for the radiator top bar and slotted wall fixings.
- Speaker wall bracketWall plate for a speaker with a tilt arm, an arc slot for angle adjustment and four wall screw holes.
- Projector ceiling plateCeiling plate for a projector or screen drop pole, with a centre pole hole and slotted ceiling fixings.
- Satellite dish wall plateWall plate for a satellite dish or aerial mast, with a U-bolt hole pair and four wall fixings.
- Awning arm bracketWall bracket for an awning arm, with a pivot boss hole and four wall fixings.
- Bike wall hook plateWall plate with an upturned hook arm for hanging a bike by the wheel, and four screw holes.
- Floor door stop plateFloor plate for a door or gate stop with a raised buffer post hole and two countersink screw holes.
- Wall tie plateLateral restraint wall tie plate: a long strap with a turned-down end marked and fixing holes along it.
Typical prices
Worked out live from current rates for parts like these in mild steel, ex VAT. Click a row to open it in the Nesting Studio and change it.
Loading typical prices…