62ready-made designs to size
50 mmthickest mild steel
48 hfree quotation
£15.80minimum order, ex VAT
About these parts
Lawn edging, planter panels, gate panels, fire pit parts, screens and garden features.
Who orders them: Landscapers, garden designers and homeowners, often in Corten for a rust finish or mild steel for painting.
Open any design below in the Nesting Studio, type in your sizes, holes and quantity, and the price updates as you go. Identical parts share one part mark and are nested together on the sheet.
Designs in the shape library
- Gate hinge strapTapered gate strap with a rolled-eye or pin hole at the hinge end and countersink-size screw / bolt holes along the strap.
- Hinge pin / hook platePost-side hinge plate: square or rectangular plate with a central pin hole for a welded hinge pin and four fixing holes.
- Drop bolt keepKeep / guide plate for a drop (cane) bolt: plate with a bolt hole near one end and two fixing holes.
- Gate latch plate (thumb latch)Gate latch keep: shaped plate with a hooked catch notch for the latch bar and fixing holes.
- Hasp and staple pairHasp blank with a slot for the staple and a staple plate with a padlock loop hole; cut as one part with a sprue to snap apart, or choose either piece.
- Fence panel bracketFlat blank for a U-shaped fence panel bracket: centre web with post screw holes and two wings with panel holes, fold lines etched.
- Gravel board clipSmall L-clip blank for fixing a gravel board to a post: etched fold line, two screw holes per leg.
- Post cap / finial profileFlat profile for a welded post top or railing finial: spear, fleur, acorn, ball, pyramid or round, on a base tab.
- Gate stop / catchGate stop plate with a slotted face for a rubber buffer and two ground or wall fixing holes on a tab.
- Gate wheel bracketSide plate for a gate support wheel: axle hole at the bottom and gate-frame bolt holes or slots above for height adjustment.
- Railing panel bracketLug that bolts a railing panel to a wall or post: tab with a slotted panel hole at one end and two wall holes.
- Planter / tree ring segmentCurved planter or tree-surround edging segment: an arc strip that rolls into a ring, with joint plates holes at each end.
- Raised bed corner plateFlat corner bracket for raised beds or sleeper planters: folded down the etched line, with screw holes in both legs and a ground stake point.
- Lawn edging strip with stakesSteel landscape edging strip with ground stakes cut on the bottom edge and overlap holes at each end for joining lengths.
- Fire pit side panelFlat-pack fire pit side panel: tapered sides, decorative cut-outs, interlocking slots at each edge and air holes near the base.
- Fire pit ring blankStrip that rolls into a fire-pit ring: length set from the ring diameter, optional decorative cut-outs and air holes along the bottom.
- BBQ / fire grill plateRound or rectangular grill grate with parallel slots (stays in plate between), for fire pits and barbecues. Food-safe stainless recommended.
- Bird box front plateFront panel for a nest box with a round entrance hole (25 mm blue tit, 28 mm great tit, 32 mm sparrow are common sizes) and fixing holes.
- Bird feeder hanger armWall bracket arm with a curled hook end for bird feeders or hanging baskets, two wall fixing holes.
- Plant label stakePointed garden marker stake with the plant name cut through (bridged stencil) in the head.
- Garden silhouette stakeLawn silhouette on a ground spike: hedgehog, robin, sitting cat or rabbit, cut as one piece.
- Sundial plate and gnomonHorizontal sundial gnomon cut to your latitude (style angle = latitude, about 51.5° for London), or the round dial plate with hour lines etched.
- Boot scraper bladeBoot scraper blade with two ground spikes and a decorative top (plain, scroll ends or hedgehog bumps).
- Hose hanger bracketWall-mounted hose hanger blank: back plate with fixing holes and a semicircular saddle to fold forward along the etched line.
- Tree guard panelTall tree-guard side panel with vertical slots and pointed tops on the bars.
- Plant support half-hoopFlat half-hoop plant support with two legs to push into the soil.
- Garden obelisk side panelTapered obelisk side with diamond openings for climbing plants.
- Diamond trellis panelSteel trellis panel: a diagonal lattice of diamond openings in a solid frame.
- Hedgehog house entrance plateFront plate for a hedgehog house with a 130 mm square-arched entrance, too small for most cats and foxes.
- Bat box frontFront panel for a bat box with a narrow 15–20 mm entry slot at the bottom.
- Arched fence topperFence-panel topper with a concave arched top edge and a row of circle cut-outs.
- Planter foot bracketL-shaped foot that bolts under a planter corner to lift it off the ground for drainage.
- Log store end panelEnd panel for a log store: rectangle with a big decorative circle cut-out and fixing holes.
- Garden tool rack barWall bar with open slots that hold spade and fork handles, and fixing holes between.
- Hose guide stakeFlat stake with a rounded head and a large hole that guides the hose round the border corner.
- Solar light ring stakeStake with a flat ring on top to hold a solar light or jar lantern.
- Garden sign on a stakeSign blank with an integral pointed stake to push into the ground.
- Lawn edging cornerRight-angle corner piece for steel lawn edging with stakes on both legs (fold along the etched line).
- Chicken coop pop-hole doorSliding pop-hole door with a lifting-cord hole and a finger slot.
- Wind spinner blankDisc with curved radial slits that are twisted after cutting to make a wind spinner.
- Weather vane arrowWeather-vane arrow with a feathered tail and a pivot hole at the balance point.
- Weather vane compass crossFixed compass cross for a weather vane with the N, E, S and W letters etched near the arm ends.
- Pergola knee brace plateCurved knee-brace plate between a post and a beam, with bolt holes at both ends.
- Compost bin side panelSide panel for a compost bay with rows of air slots and fixing holes on the edges.
- Log rack end frameU-shaped end frame for a firewood rack, cut from one plate, with feet.
- BBQ windshield panelTall side panel that stops wind blowing across a barbecue, with low vent slots and two locating tabs.
- Plant pot trivetRound trivet that lifts a pot clear of the paving, with drainage cut-outs.
- Parasol base plateCross-shaped base plate for a parasol pole with a centre socket hole and holes for ground anchors or weights.
- Shepherd's crook plant hookFlat shepherd's crook stake for hanging baskets and lanterns, cut as one piece.
- Hanging basket bracketHanging basket bracket with a curved arm, a hanging slot at the tip and a wall plate with two screw holes.
- Gate closer bracketOffset bracket for a gate closer spring, with a slotted post fixing and an eye for the spring end.
- Raised bed stake platePointed ground stake plate for holding raised bed sides, with screw holes in the top section.
- Trellis wall spacerSpacer plate that holds a trellis off the wall, with a wall screw hole and a trellis fixing slot.
- Bird table tray blankFlat tray blank with corner notches so the edges fold up, plus drainage holes.
- Fence panel clip blankFlat blank for a U-shaped fence panel clip, with fold lines etched and screw holes in the ears and back.
- Garden arch side panelTall side panel for a garden arch with a ladder of square openings for climbers to grip, and ground spike tabs.
- Plant pot stand ringRing for a plant pot stand with three leg tabs projecting outward.
- Water butt stand sideSide panel for a water butt stand: a deep U with a curved top to cradle the butt, and floor tabs.
- Soil sieve plateRound perforated plate for a soil or compost riddle, with a plain rim for the frame.
- Rotisserie forkFlat rotisserie fork with prongs and a square hole that slides on the spit rod.
- Stove door blankDoor blank for a stove or firebox with a window opening for the glass and hinge-pin and latch holes.
- Fireplace fretLow decorative front for an open fire grate: a stepped top with round and slot cut-outs.
Typical prices
Worked out live from current rates for parts like these in mild steel, ex VAT. Click a row to open it in the Nesting Studio and change it.
Loading typical prices…