34ready-made designs to size
50 mmthickest mild steel
48 hfree quotation
£15.80minimum order, ex VAT
About these parts
Cleat plates, mounting plates, backing plates and pontoon parts.
Who orders them: Boat builders, marinas and pontoon fabricators, usually in 316 stainless or 5083 aluminium for salt water.
Open any design below in the Nesting Studio, type in your sizes, holes and quantity, and the price updates as you go. Identical parts share one part mark and are nested together on the sheet.
Designs in the shape library
- Mooring cleat base plateBacking / base plate for a deck cleat: obround plate with the cleat bolt pair at your centres and optional extra hole pair. Not load rated: a cut blank only.
- Pad eye plate (marine)Flat pad-eye blank with a rounded head and pin hole, on a wide weld-on or bolt-down base. Not load rated: a cut blank only.
- Anchor silhouette plateClassic fisherman anchor silhouette (ring, stock, shank, curved arms with flukes), cut as one piece for signs and decor.
- Ship's wheel decorShip's wheel silhouette: rim with spokes running through to turned handles and a centre hub hole.
- Fairlead / rope guide plateFlat fairlead plate: obround rope opening with radiused edges in a plate with four fixing holes.
- Pontoon / jetty joint plateJoint plate for pontoon or jetty frames: long plate with two groups of slotted holes so units can be aligned on the water.
- Outboard transom padTransom reinforcement pad for small outboards: rectangle with radiused corners and four through-bolt holes at your clamp positions.
- Mooring bollard base flangeRound base flange for a mooring bollard: centre socket and bolts on a PCD.
- Horn cleat profileFlat horn-cleat profile with two base bolt holes, for fabricating a welded cleat.
- Bow-eye backing plateBacking plate for a bow eye: radiused plate with the two bow-eye stud holes and a drain hole.
- Rudder blade blankRudder blade with a raked leading edge, rounded tip and pintle-fitting holes along the top edge.
- Tiller armTapered tiller arm with a rudder-head bolt hole and an extension hole at the end.
- Davit base plateSquare base plate for a boat or tender davit with a socket hole and four bolts.
- Boat trailer roller bracketSide plate for a boat-trailer keel roller: spindle hole at the top and U-bolt slots at the base.
- Swim ladder bracketMounting bracket for a swim or boarding ladder: hooked top to hang the ladder and bolt holes for the transom.
- Anchor chain stopper plateDeck plate with a keyhole-shaped chain slot: the round end passes the chain, the narrow slot locks a link.
- Porthole trim ringTrim ring for a round porthole or portlight with screw holes round it.
- Mooring ring plateWall or pontoon plate with a raised lug and a large ring hole for a mooring ring or shackle.
- Boat chock / cradle padCradle plate with a concave top curve to support a hull, and slots to adjust its height.
- Fairlead plateDeck plate with an obround rope lead slot and four countersink fixing holes.
- Winch pad plateRound winch mounting pad with bolt holes on a pitch circle and a centre drain hole.
- Mast step plateMast step plate with a central slot for the heel fitting and bolt holes round the edge.
- ChainplateTapered chainplate strap with a round top for the shackle pin and a line of hull bolt holes.
- Bow roller cheek plateSide cheek for an anchor bow roller, with the roller axle hole at the nose and a keep-pin hole behind it.
- Boarding step plateStep plate with rows of anti-slip slots and a fixing hole in each corner.
- Hatch hinge plateHinge leaf with a rounded knuckle tab carrying the pin hole and countersink holes along the leaf.
- Outboard bracket cheekCheek plate for an auxiliary outboard bracket: a pivot hole and a row of tilt-pin holes on an arc.
- Jetty cleat backing plateElongated hexagonal backing plate for a jetty or pontoon cleat, with four bolt holes.
- Kayak rack armWall rack arm with a curved cradle for a kayak or paddleboard hull and two wall fixing holes.
- Launching wheel bracketTransom bracket for a dinghy launching wheel: a rounded leg with the axle hole and four transom bolt holes.
- Anode mounting platePlate for bolting a sacrificial anode: two stud holes on the long axis and corner fixing holes.
- Scupper drain plateRound drain plate with radial slots and countersink fixing holes on the rim.
- Rubbing strake joinerCurved joiner plate for a steel rubbing strake or fender rail, with slotted holes for adjustment.
- Davit arm plateCurved davit arm cut from plate with a sheave pin hole at the tip and pivot holes at the base.
Typical prices
Worked out live from current rates for parts like these in mild steel, ex VAT. Click a row to open it in the Nesting Studio and change it.
Loading typical prices…