32ready-made designs to size
50 mmthickest mild steel
48 hfree quotation
£15.80minimum order, ex VAT
About these parts
Stair stringers, tread plates, cleats, newel base plates, baluster plates and handrail brackets.
Who orders them: Staircase and balustrade fabricators. Stringers and treads are cut flat from plate, ready for folding or welding.
Open any design below in the Nesting Studio, type in your sizes, holes and quantity, and the price updates as you go. Identical parts share one part mark and are nested together on the sheet.
Designs in the shape library
- Cut (sawtooth) stair stringerPlate stair stringer with the sawtooth profile cut for each tread: rise, going and number of risers, a waist depth below the nosings and floor / landing bearing cuts.
- Flat stair stringer with cleat holesStraight (closed) plate stringer at the stair pitch with bolt-hole pairs for each tread angle cleat, plumb top cut and level bottom cut.
- Stair tread with nosing slotsPlate stair tread: rectangle with an etched contrasting nosing band line, drainage / anti-slip slots across the width and end cleat bolt holes.
- Landing / quarter landing plateLanding deck plate with optional corner cut for a newel, drainage holes on a grid and edge fixing holes.
- Spiral stair treadWedge-shaped spiral stair tread: centre column ring, tread angle from treads per turn, outer radius and a baluster hole at the outer edge.
- Baluster / post lugSide-fix lug for welding to a post and bolting to the stringer face: tab with two slotted holes so the post can be plumbed.
- Handrail end cap / wall plateRound handrail wall rose or end cap with three or four countersink-size screw holes and the rail tube outline etched.
- Glass balustrade base plateSquare or round base plate for a glass spigot or post: central spigot hole, four anchor holes and an optional drain notch.
- Folded stair nosing blankFlat blank for a folded stair nosing: tread leg with countersink holes and anti-slip slots, riser leg, fold line etched.
- Ladder stile with rung holesFlat ladder stile with round rung holes at 250–300 mm pitch (typical for fixed ladders) and wall bracket holes.
- Winder treadTapered winder tread for a turning stair: narrow and wide ends with a straight nosing and fixing holes.
- Kite winder treadKite-shaped winder for the corner of a quarter turn, with fixing holes near each edge.
- Curved stringer segmentFlat arc band cut as a segment of a curved stringer or curved handrail plate (roll or form to suit).
- Handrail wall bracketFlat handrail bracket: round wall rose with three screw holes, cranked arm and a saddle to carry the rail.
- Round balustrade post baseRound base plate for a balustrade post: post outline etched and four fixings on a PCD outside it.
- Side-fix post plateSide-fixing plate for a balustrade post on a slab edge or stringer: two vertical slots for level adjustment.
- Newel cap plateSquare cap plate for a newel or box-section post, with a chamfered edge line etched and an optional finial hole.
- Stair riser plateRiser plate between treads: plain or with a row of perforations, and slotted fixings at each end.
- Ladder safety-hoop segmentFlat C-shaped hoop for a fixed-ladder safety cage, with bolt lugs at each end and slots for the vertical straps.
- Stair hanger strapHanger strap for a suspended stair or landing: long flat with a hole at the top and a slotted adjustment at the bottom.
- Landing trimmer cleatCleat plate for a landing trimmer beam: tab with two bolts and a raked top corner.
- Cat-ladder stand-off bracketStand-off bracket that holds a fixed ladder 200 mm or so off the wall: tapered arm, wall foot and stile holes.
- Toe-board bracketSmall bracket that clamps a toe board to a handrail standard: curved saddle and two bolt holes.
- Stair top hook plateHead plate that hooks a stair stringer over the mezzanine edge beam, with bolt holes into the beam.
- Stringer connection platePlate connecting a stair stringer to a landing trimmer, cut to the stringer pitch with bolt holes.
- Tread support angle blankFlat blank for a pressed tread support angle, with fold line etched and holes in both legs.
- Half landing plateL-shaped half landing plate with countersink fixing holes round the edge.
- Handrail bend joinerCurved joiner plate for a flat bar handrail at a change of direction, with countersink screw holes either side.
- Spiral stair centre collarCollar plate for a spiral stair tread, with the column hole and a projecting tread arm with fixing holes.
- Loft ladder bracketPivot bracket for a loft ladder with a pivot hole, a stop slot and three fixing holes.
- Fire escape treadPerforated external stair tread with rows of drainage slots and end fixing holes.
- Stair gate wall plateWall plate for screwing a stair gate cup to plaster or a newel, with two cup holes and four screw holes.
Typical prices
Worked out live from current rates for parts like these in mild steel, ex VAT. Click a row to open it in the Nesting Studio and change it.
Loading typical prices…