53ready-made designs to size
50 mmthickest mild steel
48 hfree quotation
£15.80minimum order, ex VAT
About these parts
Welding table parts, jig plates, fixture blocks, tool holders and clamp parts for your own workshop.
Who orders them: Fabrication and maintenance workshops making their own welding tables and fixtures.
Open any design below in the Nesting Studio, type in your sizes, holes and quantity, and the price updates as you go. Identical parts share one part mark and are nested together on the sheet.
Designs in the shape library
- Table leg top plateTop plate for welded table legs: square or round plate with countersink-size screw holes and the leg position etched.
- Hairpin leg plateMounting plate for hairpin legs: rectangle angled-corner plate, rod positions etched, four screw holes.
- Bed rail bracketHook-on bed rail bracket: plate with two angled hook slots that drop over pins, plus screw holes.
- Workbench / machine footFoot plate for bench or machine legs: plate with a central levelling-screw hole, floor anchor holes and the leg outline etched.
- Shelf bracket (profiled)Flat shelf bracket in a choice of profiles (plain, curved, cut-out triangle, round window, industrial) with wall and shelf screw holes.
- Coat hook blankFlat coat hook to bend up at the etched line: back plate with two screw holes and a rounded hook tongue (single or double).
- Coat rack railRail plate with a row of fold-up hook tongues cut on three sides (bend each up at its etched line) and wall screw holes between.
- Decorative corbelDecorative corbel bracket with an ogee or stepped front curve and fixing holes in both legs.
- Baluster infill panelBalustrade infill panel cut from plate: vertical bars with a decorative band (circles, diamonds or waves) and fixing lugs top and bottom.
- Welding fixture table plateModular welding table top or tile: 16 mm or 28 mm system holes on a 50 or 100 mm grid with an etched reference grid line every hole row.
- Clamp / vice jaw plateReplacement vice / clamp jaw plate with two countersink-size fixing holes at your centres and optional V-groove notch for round stock.
- Welding magnet square platesSide plates for a home-made welding magnet: arrow-shaped plate with 45° and 90° faces, lightening hole and two rivet / bolt holes for the magnet block.
- Tensile test couponFlat dog-bone tensile coupon in typical BS EN ISO 6892-1 proportions: parallel gauge width b, gauge length, generous transition radius and grip ends. Machine edges after cutting for a valid test.
- Bend test couponRectangular bend-test strip in typical BS EN ISO 5173 proportions with an etched weld centre line and radiused long edges noted for dressing.
- Weld procedure test platePair of butt-weld test plates with an optional bevel allowance marked by an etch line and a stamp area etched in the corner.
- Drill template plateDrilling template with a rectangular or circular hole pattern, etched centre lines and a datum corner notch so it always goes on the right way round.
- Tool hanger pegboardSteel pegboard panel: a grid of 6 mm or 8 mm hook holes (25 or 38 mm pitch) with countersink-size fixing holes in the border.
- Weld fillet / angle gaugePocket gauge with notches for common fillet leg sizes (3 to 12 mm) on one edge and 30/45/60/90 degree angle notches on another, sizes etched.
- Radius gauge plateGauge plate with convex and concave radius checks on its edges, each etched with its size.
- Wire / sheet gauge plateRound gauge with slots round the edge for checking wire and sheet sizes, each slot etched with its size in mm.
- Bolt and nut size gaugePlate with clearance-size holes for M3 to M24 bolts, each etched with its size, for sorting bolts quickly.
- Drill size gaugePlate with holes from 1 to 13 mm in 0.5 mm steps for checking drill sizes, etched with each size.
- Drill point angle gaugeGauge with a 118° (or chosen) notch for checking drill point angles when sharpening, with a length scale etched along the edge.
- Welding table stop (bench dog)Flat stop for a welding-table hole grid: tab with a locating hole and a straight or V stop edge.
- V-block platePlate with a 90° V notch to hold round bar for drilling or welding, plus a clamp slot.
- Welding corner squareRight-angle welding square with a clamp window and a relief notch at the corner for the weld.
- Mitre and angle templateMarking template with 45°, 30° and 60° edges for setting out mitres and angles.
- Spanner rackWall rack with open slots that hold spanners by the jaw, and keyhole fixings.
- Screwdriver rackStrip with a row of graded holes for screwdrivers, files and pliers handles.
- Sawhorse leg bracketFlat bracket plate that joins a timber top rail to two splayed legs, with screw holes.
- Grinder tool restReplacement tool rest for a bench grinder: platform with a slotted mounting tab.
- Saw length stopFlip-up length stop for a saw fence: plate with a clamp slot and a pivot hole.
- Hose / cable reel bracketWall bracket with a curved saddle that hangs a coiled hose or cable, and keyhole fixings.
- Gas cylinder wall bracketWall plate for securing gas cylinders with a chain: chain slots at each side and fixing holes.
- Welding gear wall hookFlat wall hook with a wide curved arm for helmets, leads and gauntlets.
- Fire extinguisher wall plateWall plate with an extinguisher hook tab and a sign panel above.
- Hole drilling jig stripDrilling jig strip with a row of guide holes at equal pitch and a stop tab at one end.
- Pegboard panelSteel pegboard panel with a grid of peg holes and countersink fixing holes in the corners.
- Vice jaw coverVice jaw plate with a V-groove notch along the top for holding round bar, and two screw holes.
- Clamp rackWall rack for G and F clamps: a strip with open slots along the front and wall fixing holes.
- Tap wrench blankBar-type tap wrench blank with a square drive hole in a round centre boss.
- Chisel and file rackShelf strip with a row of round and slotted holes to hold chisels, files and punches.
- Air line bracketWall bracket for an air filter-regulator unit with a centre port hole and fixings.
- Grinding disc holderWall plate with a tab sized to the disc bore; the tab is bent out at 90 degrees on the etched line and the discs stack on it.
- Steel rule blankSteel rule blank with etched graduations every 10 mm and longer marks every 50 mm.
- Centre finder plateCentre finder for round bar: a 90 degree V notch with an etched line that bisects it. Sit the bar in the V and scribe along the line.
- PCD marking templateDrilling template with a ring of holes on a pitch circle and a centre locating hole.
- Tool hook stripWall strip with a row of upturned hooks for hanging tools and cables.
- Sheet rack uprightUpright for a vertical sheet or offcut rack, with angled divider slots.
- Bench grinder stand plateTop plate for a bench grinder pedestal with slotted grinder feet holes and a central tube hole.
- Plasma circle cutting guideTrammel bar for cutting circles by hand: a torch ring hole and a row of pivot holes along the arm.
- Pallet racking footplateFootplate for a pallet racking upright: a plate with anchor holes either side of the upright and two bolt holes for the upright itself.
- Racking row spacerFlat row spacer that ties back-to-back racking frames together, with a pair of holes at each end.
Typical prices
Worked out live from current rates for parts like these in mild steel, ex VAT. Click a row to open it in the Nesting Studio and change it.
Loading typical prices…